Drill Bits and Cutters

Items 41 to 50 of 99 total

per page

Grid  List 

Set Descending Direction
  1. Auger wood bits, Ø 10.0-19.0 mm, hex shank

    Auger wood bits, Ø 10.0-19.0 mm, hex shank

    Starting at: £7.81

    • SDS shanks are available on request Learn More
  2. Flat wood bits, Ø 10.0-18.0 mm

    Flat wood bits, Ø 10.0-18.0 mm

    Starting at: £2.29

    • Integral centre point and twin cutting edges enhance speed and rapid chip removal Learn More
  3. Flat wood bits, Ø 20.0-28.0 mm

    Flat wood bits, Ø 20.0-28.0 mm

    Starting at: £2.40

    • Integral centre point and twin cutting edges enhance speed and rapid chip removal Learn More
  4. Solid Board Cutters

    Solid Board Cutters

    Starting at: £3.08

    • For drilling Ø 110 mm access holes in solid boards
    • Covers lie flush with the floor
    • Set consists of:
    - 1x Solid board cutter
    - 3x Plastic caps
    • Please note: Solid board cutters must be used with holesaw arbours, please see Don't Forget to Order Learn More
  5. Long drill adapter

    Long drill adapter

    Starting at: £15.92

    • Converts standard housing down to smaller bore for long drill, see Related Products
    • To drill through full width of door for electric cables etc. Learn More
  6. Cutter for handle recesses, Ø8 mm shank

    Cutter for handle recesses, Ø8 mm shank

    Starting at: £120.48

    • For cutting handle recesses straight through or for 1:1 copying with a handle template
    • Easy to plunge into solid material
    • Rip free through drilling
    • Shaft: Ø 8 mm
    • Tip material: HW (formerly HM) Learn More
  7. Radius cutter, Ø 1/4' or 1/2" shank

    Radius cutter, Ø 1/4' or 1/2" shank

    Starting at: £62.24

    • For use with sloping drainer routing jig 002.21.501, shown in Related Products
    • Router will require a clamping collet
    • Two fluted
    • Tungsten carbide tipped Learn More
  8. Rounding cutter, Ø8 mm shank

    Rounding cutter, Ø8 mm shank

    Starting at: £76.28

    • For rounding a bevelled edge with a 6 mm radius
    • With conical ball-bearing guide
    • Shaft Ø: 8 mm
    • Tip material: HW (formerly HM) Learn More
  9. Shaft for DBB mortice jig

    Shaft for DBB mortice jig

    Starting at: £13.66

    • New screw-on shaft design
    • For replacement shaft for standard and offset jigs, shown in Related Products, use 220 mm length
    • For locks up to 180 mm depth use 298 mm length shaft
    • Steel Learn More
  10. Router cutter, Ø 1/2" shank

    Router cutter, Ø 1/2" shank

    Starting at: £27.56

    • Straight, two flute
    • Shaft Ø: 1/2" / 12.7 mm
    • Tungsten carbide tipped Learn More

Items 41 to 50 of 99 total

per page

Grid  List 

Set Descending Direction

Compare Products

You have no items to compare.

MY TROLLEY

#

You have no items in your basket.

Community Poll

What is your favorite color