Drill Bits and Cutters

Items 31 to 40 of 99 total

per page

Grid  List 

Set Descending Direction
  1. Drill bit, Ø 16 mm

    Drill bit, Ø 16 mm

    Starting at: £6.92

    • For drilling through-hole for leading cables through wooden doors Learn More
  2. Router bit, Ø 32 mm

    Router bit, Ø 32 mm

    Starting at: £267.01

    • For widening the cable drilling on the outside through to the lock recess (only when logging the emergency opening)
    • With centering pin Learn More
  3. Disc groove cutter, Ø 8 mm shank

    Disc groove cutter, Ø 8 mm shank

    Starting at: £23.81

    • For cutting grooves
    • Shaft Ø: 8 mm
    • Groove: 8 mm
    • Tip material: HW (formerly HM)
    • Without routing spindle, routing spindle must be ordered separately Learn More
  4. Bevel cutter, HW tipped, with ball-bearing guide, Ø8/12 mm shank

    Bevel cutter, HW tipped, with ball-bearing guide, Ø8/12 mm shank

    Starting at: £75.96

    • Shaft Ø: 8 mm or 12 mm
    • Tip material: HW (formerly HM)
    • For a rounded bevel use in combination with rounding-bevel cutter Learn More
  5. Up-cut right hand spiral router, Ø 1/4" shank

    Up-cut right hand spiral router, Ø 1/4" shank

    Starting at: £43.56

    • Ideal for hardwoods and abrasive materials
    • Produces a fine finish, up cut prevents burning in plunge cuts
    • Permits high feed speed
    • Allows better chip clearance
    • Shaft Ø: 1/4”
    • Tip material: Solid tungsten carbide Learn More
  6. Drawer pull cutters, Ø 1/2" shank

    Drawer pull cutters, Ø 1/2" shank

    Starting at: £130.12

    • Shaft Ø: 1/2”
    • For producing finger grooves or protruding grip
    • Solid tungsten carbide Learn More
  7. Quarter-based cutter, HW tipped, Ø8 mm shank

    Quarter-based cutter, HW tipped, Ø8 mm shank

    Starting at: £89.38

    • For cutting false fillings
    • With machined cutting tip for plunging into furniture fronts
    • Shaft diameter: 8 mm
    • Tip material: HW (formerly HM) Learn More
  8. Flush trimmer (duplicating cutter), HW tipped, with ball-bearing guide, Ø8 mm shank

    Flush trimmer (duplicating cutter), HW tipped, with ball-bearing guide, Ø8 mm shank

    Starting at: £75.96

    • With large ball-bearing guide for 1:1 duplication
    • Shaft diameter: 8 mm
    • Tip material: HW (formerly H)M
    • With 12.7 mm diameter: ball-bearing guide below
    • With 19 mm diameter: ball-bearing guide above Learn More
  9. SDS Plus drill bits, Ø5.0 - 10.0 mm

    SDS Plus drill bits, Ø5.0 - 10.0 mm

    Starting at: £1.68

    Advanced carbide tip technology enables:
    • Increased penetration rates
    • More efficient cutting
    • Clean and accurate holes
    • Optimum fit or fixings
    • Ability to drill multiple materials Learn More
  10. Auger wood bits, Ø6.0 mm, hex shank

    Auger wood bits, Ø6.0 mm, hex shank

    Starting at: £5.78

    • SDS shanks are available on request Learn More

Items 31 to 40 of 99 total

per page

Grid  List 

Set Descending Direction

Compare Products

You have no items to compare.

MY TROLLEY

#

You have no items in your basket.

Community Poll

What is your favorite color