Ventilation Systems

Items 31 to 40 of 66 total

per page

Grid  List 

Set Descending Direction
  1. Slimline airbrick wall outlet, system 6a

    Slimline airbrick wall outlet, system 6a

    Starting at: £7.08

    • For use with system 6a
    • Size: 142 x 236 mm
    • UV stabilised material Learn More
  2. Ducting set, system 6 to 6a, x 3 m

    Ducting set, system 6 to 6a, x 3 m

    Starting at: £67.94

    • Supplied with fixings: 4x screws and wall plugs
    • White ducting kit with either white or brown external grille
    • Please note:
    - System 6 = approx. Ø 150 mm
    - System 6a = W220 x H90 mm
    Learn More
  3. Ducting set, system 4, x 1 m

    Ducting set, system 4, x 1 m

    Starting at: £6.83

    • Supplied with fixings 4x screws and wall plugs
    • White ducting kit with either white or brown external grille Learn More
  4. Ducting set, system 6, x 1 m

    Ducting set, system 6, x 1 m

    Starting at: £16.42

    • Supplied with fixings: 4x screws and wall plugs
    • White ducting kit with either white or brown external grille Learn More
  5. Horizontal tube bend, system 150

    Horizontal tube bend, system 150

    Starting at: £24.08

    • White plastic Learn More
  6. Vertical tube bend, system 150

    Vertical tube bend, system 150

    Starting at: £18.04

    • White plastic Learn More
  7. Deflector with tube, system 150

    Deflector with tube, system 150

    Starting at: £34.61

    • Tube 500 or 900 mm length
    • White plastic Learn More
  8. Deflector, system 150

    Deflector, system 150

    Starting at: £21.73

    • White plastic Learn More
  9. End piece, system 150

    End piece, system 150

    Starting at: £18.94

    • White plastic Learn More
  10. Star rectangular wall vent system

    Star rectangular wall vent system

    Starting at: £231.62

    • The Compair® flow Star Wall vent system prevents warm room air escaping outside which compared with a traditionalwall vent system, amounts to daily savings of both energy and cost. This is achieved because the vent cover only remains open when there is air pressure. When there is no air pressure the cover remains in place.
    • Advantages:
    - Lowest pressure loss of all common wall conducts
    - Maximum flow rate of vapour hood
    - Low noise generaton by vapour hood
    - Optimum heat insulation
    - No back pressure shutter required
    - No rattling in case of gusts of wind
    - Good seal with the vapour hood switched off
    - Complies with the requirements of the blower door test
    • Comprises
    - Round external stainless steel cover: Ø 197 mm (125 system) or Ø 220 mm (150 system)
    - Duct tube, adjustable length; see below
    - Plate
    • System: 125
    - Plate (H x W): 155 x 155
    - Connector depth: 80 mm
    - Min. pressure: 100 Pa
    • System: 150
    - Plate (H x W): 190 x 180
    - Connector depth: 80 mm
    - Min. pressure: 150 Pa Learn More

Items 31 to 40 of 66 total

per page

Grid  List 

Set Descending Direction

Compare Products

You have no items to compare.

MY TROLLEY

#

You have no items in your basket.

Community Poll

What is your favorite color