Few single parts - lots of Advantages.
AVENTOS HS covers all common flap widths and heights with one simple programme:
|
Cabinet widths up to 1800 mm |
| Cabinet widths up to 1800 mm |
| Cabinet heights from 350 to 800 mm |
| 9 different lift mechanisms and one lever arm HS |
| Suitable for cornices |
| Lift mechanisms and front fixing brackets can be used symmetrically |
|
 |
|
| |
| [Return to Top] |
| |
Quick and easy removal
An experienced kitchen installer will remove the front when assembling the wall cabinet. This protects surfaces and makes the cabinet lighter. The AVENTOS HS incorporates CLIP technology to ensure that fronts can be removed quickly. In this way, the cabinet can be quickly, easily and (last but not least) securely attached to the wall for the final assembly.
|
 |
|
| |
Exact and easily adjustable
The front can be adjusted by hand in 3 dimensions. This enables you to carry out width, height and tilt adjustments quickly and easily onsite with the customer - for a perfect gap design. The 3-dimensional adjustment feature enables fronts to be customised exactly. The lift mechanisms can also be set to the respective door weight (using the calibration).
|
 |
|
| |
| [Return to Top] |
| |
|
DYNALOG 2.0
DYNALOG 2.0 is software from BLUM for planning carcases and ordering fittings.
DYNALOG 2.0 also contains all essential planning information for AVENTOS.
|
 |
| |
Drilling and Insertion Machines
Our wide range of drilling and insertion machines are equipped to deal with any
assembly situation. Take a look at our PDF catalogue under "Downloads" to get a quick overview.
|
 |
| |
Jigs and assembly devices
Use our jigs and assembly devices to ensure the highest precision for AVENTOS assembly.
|
 |
|
| |
|
|