Daro Factors Ltd.

home

profile

terms

contact

new ranges

catalogue

my basket	- (0) items
	- £0.00

search

products

	brackets, plates & hooks		locks, keys & escutcheons
	catches & bolts		picture & mirror fittings
	drawer runners & systems		racks, rails & supports
	glides, castors & table fittings		shelving systems
	handles, knobs & pulls		stays
	hinges		decorative grilles
	knock-down, fasteners & fixings		wire work systems
	lighting		miscellaneous
	glue

Few single parts - lots of setting options.

One, two or three lift mechanisms and their associated telescopic arms are required depending on the width of the carcase.

Cabinet heights from 480 to 1040 mm
Cabinet widths up to 1800 mm
Only 3 lift mechanisms and 4 telescopic arms for all application areas
Lift mechanisms and front fixing brackets can be used symmetrically

Ease-of-use

An international survey of kitchen installers backs up the ideas behind the AVENTOS HF design:

96.5% of those surveyed said that bi-fold lift system fronts should be easy to install and remove.
70% desired a system with easier gap adjustment and an easier fine adjustment for the opening and closing forces.
Thanks to proven CLIP top technology, both fronts can be installed and/or removed easily and without the need of tools. The CLIP top hinges enable 3 way independent adjustment. Lift mechanisms have a infinitely variable setting via the integrated calibration feature. This enables fronts to remain in any desired position.

DYNALOG 2.0 DYNALOG 2.0 is software from BLUM for planning carcases and ordering fittings. DYNALOG 2.0 also contains all essential planning information for AVENTOS.

Drilling and Insertion Machines Our wide range of drilling and insertion machines are equipped to deal with any assembly situation. Take a look at our PDF catalogue under "Downloads" to get a quick overview.

Jigs and assembly devices Use our jigs and assembly devices to ensure the highest precision for AVENTOS assembly.